50T中频熔钢炉

The molten steel furnace is a power-saving type product, which adopts a half-bridge parallel inverter intermediate frequency power supply (voltage resonance , whether the electric furnace is cold state, hot state, plus half charge or full material, the half bridge parallel inverter can output the rated Power, power factor is constant at 0.9 6 . ) The molten steel furnace is safe and reliable, in line with national standards and related regulations.

The molten steel furnace has the advantages of high automation level, advanced technology, mature, accurate and reliable control, mature manufacturing process, safe and stable operation, perfect protection system, reasonable layout and convenient management and maintenance. It has the characteristics of fast melting speed , low energy consumption and stable and reliable operation.

2. The composition range of this molten steel furnace :

Transformer → secondary copper discharge → intermediate frequency power supply → capacitor cabinet → furnace body → hydraulic tilting furnace system → remote control box → closed loop cooling tower → water cooled pipeline.

50T medium frequency induction heating melting furnace technical parameters

power supply	Working form: an inverter connected in parallel (SCR)power supply 24 four-phase pulse (a two electric furnace)
	Rectified form: 12 phase 24 pulse
	Output power: 2 5 00 0 KW
	Power efficiency ≥98%
	Start mode: variable frequency buffer start
	Startup rate: 100% (including heavy load)
	Rated frequency: 3 0 0Hz -500Hz
	AC voltage: 1500 V
	DC voltage: 2000 V
	IF voltage: 3000v
	DC current: 2500 A X 4
	AC current: 8000 A
	Input frequency: 50Hz
	1500v rectifier 4 way parallel, Inverter form: inverter parallel
	Dimensions: 6800 mm × 20 00 mm × 2120 mm ( length × width × height )
	Weight: 5000 KG or so
	Circulating water volume: closed - loop water cooling tower ZXZ-400T
Furnace body	Rated capacity: 45 0 0 0KG
	Maximum capacity: 50000 KG
	Rated power: 2 50 00KW
	Frequency: 300 Hz
	Power factor: ≥ 0.9 2
	Working mode: one electric two furnace
	Melting time : about 120 minutes / furnace
	Working temperature: 1 700 °C
	Loading height: 1500mm hoop height: 3200mm
	Loading diameter: 1800 mm (upper mouth) ring inner diameter: 2200mm furnace ring copper tube is 40x70x8mm
	Loading diameter: 1600 mm (lower) Ring diameter: 2200mm
	Maximum angle of the tilting furnace: 95°
	Lining thickness: 200 mm
	Outlet mode: side outlet
	Circulating water volume: 1548 tons / h
	Tilting method: hydraulic
	Unit power consumption: 5 60 degrees / ton ± 5% 1600 ° C
	Working voltage: 3200V
	Dimensions: 3680 × 4000 × 4200
	Weight: 200 00KG or so
transformer	Rated Capacity: 12500 KVA two
	Primary voltage: 10KV
	Secondary voltage: 1500v
	One phase: 3 phase
	Secondary phase number: 6 phase 12 veins
	Output form: three △ three Y
Hydraulic	Hydraulic cylinder:
	Working pressure: 10Mpa
	Diameter: Φ 320 plunger cylinder
	Itinerary: 2 107mm
	3 flow rate: >26L/Min
	Hydraulic station:
	Working pressure: 10Mpa
	Hydraulic pump: double pump double
	Form: Horizontal
	Capacity: 12 00L
Console	Mode: Electric (action indicator)
Cooling water system	One-piece layered water cooling tower ZXZ- 4 00T (40/160)
Cooling water system	Cooling capacity 2 00000 0kcal/h cooling water volume 400m3/h Fan power 11 KW × 2 units Fan air volume 125000m3/h ×2 Spray pump 280 m3/h; 5.5 kw Dimensions mm 55 00×2 6 00×4910 (One machine size)