销售经理: 150 3855 4363 130 1558 3380
24小时技术支持热线:15038554363
电话:0379-69766926
传真:0379-69766926
公司地址:洛阳自贸区高新区银昆科技园
生产厂址:洛新工业园
名称:350kW铝圆棒中频感应自动加热生产线
价格:0
该设备的主要技术要求如下:
1. 生产线名称: KGPS-350kW / 2.5kHz 铝合金圆棒中频感应自动加热生产线
2. 生产线数: 1 台
3. 设备用途:用于铝合金圆棒加热
4.设备 主要工艺参数及技术要求:
4.1 加热工艺要求:
4.1.1 毛坯材料:铝合金 6028
4.1.2 方坯规格范围:
4.1.3 加热温度: 450 〜 480 ℃下
4.1.4 节拍: 5 〜 6 秒 / 片
4.1.5 在正常运行中加热稳定,每种材料之间的温度波动在± 15 °C之内;轴向径向(核心表)≤ 20 ℃下
4.1.6 冷却水供应系统压力大于 0.5MPa (正常水压大于 0.4MPa ) , 高温为 60 °C , 相应的软管压力和接口也需要按安全标准放大。
The main technical requirements of this equipment are as follows:
1. Production line name: KGPS-350kW/2.5kHz aluminum alloy round bar medium frequency induction automatic heating production line
2. Number of production lines: 1 set
3. Equipment use: used for aluminum alloy round bar heating
4. Main process parameters and technical requirements of the equipment:
4.1 Heating process requirements:
4.1.1 blank material: aluminum alloy 6028
4.1.2 Billet specification range:
4.1.3 Heating temperature: 450 ~ 480 °C
4.1.4 beat: 5 ~ 6 seconds / piece
4.1.5 The heating is stable during normal operation, the temperature fluctuation between each material is within ± 15 °C; the axial radial (core table) ≤ 20 °C
4.1.6 Cooling water supply system pressure is greater than 0.5MPa (normal water pressure is greater than 0.4MPa ) , high temperature is 60 °C , the corresponding hose pressure and interface also need to be scaled up to safety standards.