2T钢壳液压熔化炉

The melting furnace is a power-saving product, advanced technology, precise and reliable control, mature manufacturing process, safe and stable operation, perfect protection system, reasonable layout, convenient management and maintenance. It has the characteristics of fast melting speed , low energy consumption and stable and reliable operation.

Second, the melting furnace composition range:

Medium frequency power supply → capacitor cabinet → furnace body (steel shell or aluminum shell furnace body) → tilting furnace system → remote control box → closed loop cooling tower

The melting furnace has protection systems such as overvoltage, overcurrent, water temperature, water pressure, short circuit, grounding, etc. The operation panel has various parameters of the working parameter display screen and the display working state, and there are indications such as fault and temperature.

Third, 2T melting furnace technical parameters

power supply	Working form: single power supply 6 pulses or dual power supply 12 pulses
	Rectified form: 3- phase 6- pulse or 6- phase 12- pulse
	Output power: 1000 KW or 1800 KW , different power prices.
	Power efficiency ≥98%
	Start mode: sweep soft start
	Startup rate: 100% (including heavy load)
	Rated frequency: 500KHZ-1000KHZ
	AC voltage: 400 V , 575v, 660v
	DC voltage: 500V, 776V, 900V, 1350v
	IF voltage: 1500V, 2400V, 2700V
	DC current: 2000 A
	Input frequency: 50Hz
	Circulating water volume: integrated layered water cooling tower ZXZ-120T (40/80)
Furnace body	Rated capacity: 2 000KG
	Maximum capacity: 2 300KG
	Power factor: ≥ 0.9 2
	Melting time : about 60 minutes / furnace
	Working temperature: 155 0°C -170 0°C
	Loading diameter: 620 mm (upper mouth) inner diameter of the ring: 820mm copper ring of the furnace is 30x50x6mm
	Steel: turndown maximum angle: 95 ° Aluminum Shell: turndown maximum angle: 180 °
	Outlet mode: side outlet or rear outlet
	Circulating water volume: integrated layered water cooling tower ZXZ-120T (40/80)
	Tilting method: aluminum shell 631 reducer, steel shellhydraulic
	Unit power consumption: ≤ 60 0 degrees / T ± 5% 1550 ° C
transformer	Rated capacity: 1250 KVA
	Primary voltage: 10KV
	Secondary voltage: 400 V , 575, 660v
	One phase: 3 phase
	Secondary phase number: /3 phase 6 pulse , 6 phase 12 pulse
	Output form: three △ three Y
Cooling water system	One-piece layered water cooling tower ZXZ- 120 T(40/ 80 )
Cooling water system	Cooling capacity : 6 00000 kcal / h Cooling water volume :120 m3/h Fan power : 1.1 KW × 4 units Fan air volume 16800 m3/h × 4 spray pump 120m3/h; 4.4 kw Dimensions mm 32 00× 178 0×3490 (one size)

Fourth , the melting furnace configuration table

Serial number	Name	Quantity	Remarks
1	IF power cabinet	1 set
2	Furnace body	1 set	Steel shell, yoke,
3	Hydraulic system or reducer	1 set	Hydraulic power station
4	External console	1 set	External control power adjustment for tilting furnace
5	Water cooled cable	1 set	2 roots
6	Model	1	≥ 3 mm steel plate
7	Rectifier transformer	1 set	Optional
8	PLC automatic control display system	1 set	Optional
9	Closed loop cooling tower	1 set	Optional
10	Rectifier thyristor	2 sets	spare
11	Inverter thyristor	2 sets	spare